Acl-30 Frequency Inverter Input Reactor 3 Phase Copper Choke Reactor

• Customization: Available
• Type: Choke Inductor
• Structure: Inductive Choke
• Model NO.: ACL-30
• Working Frequency: Low Frequency
• Structure of Winding: Multilayer Coil
• Nature of Operation: Choke Coil
• Structure of Magnetizer: Copper Coil
• Range of Application: Protecion
• Packaging Form: Generic
• Brand: Chifon
• Inductor Value: Variable Inductor
• Insulation Level: Fh
• Reactance Rate: 1% 2% 3% 4%
• Noise: Less Than 65dB
• Protection Grade: IP11
• Insulation Resistance: Greater Than 100ohm
• Transport Package: Carton
• Specification: 170*120*140mm
• Trademark: CHIFON
• Origin: China
• HS Code: 8504500000
• Production Capacity: 1000 Pieces/Month

Product Description

 

Model	ACL-30	Operating tempeture	-25ºC~45ºC
Power	11kw	Operation relative humidity	Not exceeding 90%
Size(L*W*H)	170*120*140mm	Dielectric  Strength	Iron core - winding resistance 3000V/50HZ, no arc breakdown for 60 seconds
Installation dimensions	80*65mm	Hs Code	8504500000
Material	Copper	Warranty	18 months

 

Product Description

An input reactor that is part of the power supply system for the frequency converter. Reactors are sometimes used to protect the frequency converter and other equipment from voltage spikes, harmonics, or other electrical disturbances.

A three-phase incoming reactor, also known as a commutation reactor, is used at the input end of a frequency converter. It passes through alternating current and its function is to limit the voltage on both sides of the grid when the frequency converter is commutating, suppress harmonics and the rise rate of closing current, and decouple the frequency converter group. It can limit the jumping of the power grid and the surge current generated during the operation of the power grid system to protect terminal electrical equipment and suppress harmonic interference.
 

 

Product Parameters

 

Incoming Reactor for Frequency Converter
Model	Power	Voltage drop(V)	Dimension(L*W*H)	Installation dimensions(L*W)	Material
ACL-10	4kw	2%	145*80*140mm	75*57mm	Copper
ACL-15	5.5kw		145*80*140mm	75*57mm	Copper
ACL-20	7.5kw		145*80*140mm	75*57mm	Copper
ACL-30	11kw		170*120*140mm	80*65mm	Copper
ACL-40	15kw		170*120*140mm	80*65mm	Copper
ACL-50	18kw		170*120*140mm	80*65mm	Copper
ACL-60	22kw		170*120*140mm	80*65mm	Copper
ACL-80	30kw		210*140*175mm	110*97mm	Copper
ACL-110	37kw		210*140*175mm	110*97mm	Copper
ACL-125	45kw		210*140*175mm	110*97mm	Copper
ACL-150	55kw		210*140*175mm	110*97mm	Copper
ACL-200	75kw		245*180*220mm	130*118mm	Copper
ACL-250	90/93kw		245*180*220mm	130*120mm	Copper
ACL-280	110kw		245*180*220mm	130*120mm	Copper
ACL-300	132kw		245*185*220mm	130*120mm	Copper
ACL-400	160kw		280*200*240mm	130*115mm	Copper
ACL-450	187kw		280*200*240mm	130*115mm	Copper
ACL-500	200kw		280*200*240mm	130*115mm	Copper
ACL-600	220/250kw		280*200*280mm	130*115mm	Copper
ACL-800	280/315kw		320*230*285mm	170*140mm	Copper
ACL-900	350kw		320*230*285mm	170*140mm	Copper
ACL-1000	355/400kw		320*240*295mm	170*140mm	Copper
ACL-1200	480/500kw		355*275*330mm	200*155mm	Copper
ACL-1400	560/630kw		355*285*340mm	200*155mm	Copper

Installation Instructions

Inspection and acceptance
1. When accepting the reactor, the user should check the outer packaging. If any damage or abnormality is found, the user should take a photo for evidence immediately, and immediately open the box for inspection to check whether the reactor is damaged, whether the product parts are damaged or displaced, tightly Whether the firmware is loose, whether the insulation is damaged, whether there are traces of dirt on the surface of the coil, etc.
2. The user should check it in time after receiving the reactor. According to the packing list and nameplate, check whether the product and its model, rated current, rated voltage, rated frequency, rated reactance rate, rated inductance value, number of phases, etc. are consistent with the order contract. Check whether the factory documents are complete and whether the accessories are consistent with the packing list.
3. Check whether the reactor is damaged during transportation, whether the product parts are damaged and displaced, whether the fasteners are loose, whether the insulation is damaged, whether there are traces of dirt on the surface of the coil, etc.
4. After the product is unpacked and checked, if it is not put into operation immediately, it should be repackaged and placed in a safe place indoors to prevent damage and theft.

Maintenance
1. In a dry and clean place, check once a year, in other places with serious pollution, check once every three or six months.
2. During the inspection, if too much dust is found to accumulate, it must be removed to ensure air circulation and prevent insulation breakdown. Use compressed air to remove dust from the ventilation duct.
3. Check whether the fasteners and connectors are loose, whether there are traces of rust and corrosion on the conductive parts and other parts, and observe whether there are traces of creep-age on the insulating surface.
4. There must be measures to prevent small animals from entering the reactor room to avoid accidents.
5. Always observe the temperature change of the reactor, and contact relevant personnel for consultation in time.
6. The installation, test, operation and maintenance of the reactor must be undertaken by qualified professionals.
 

Company Profile

FAQ

1. Can I get some samples?
Yes.Sample is available for quality check and market test.But you have to pay for it.

2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order.

3. What's your payment terms?
We usually accept all kinds of payment terms.Such as T/T, L/C, Western Union and Cash.

4. What's your warranty terms ?
We offer 18 months warranty time.

5. Do you have the products in stock?
Depending on your request, we have standard models in stock. Some special products and big order will be newly produced according to your order.

6. Can I mix different power in one container?
Yes. Different models can be mixed up in one container, even one order.

7. How does your factory control product quality?
Quality is priority ,we always attach importance to quality control from the beginning to the end of the production .Every product will be fully assembled and carefully tested before packing and shipping.

8. Can you sell spare parts?
If you are using CHIFON products.we can sell spare parts to you.But we couldn't sell the half-finished products. 

9. I would like to know if you have a partner for exporting?
Yes, our company have the right to export and can sell electrical product all over the world.

10. Can you make the inverter and soft starter control boards ?
Yes, we have a lot of experience to design frequency inverters and soft starter cabinets according to your request.But you can send us the wiring diagram.

11. Can the inverter connect with computer?
Yes, all inverters have built-in RS485 port and support Modbus communication protocol. 

12. How can I trust you?
Our company's values are integrity, responsibility, innovation and cooperation and our company has been audited and approved CE, ISO9001. Assessment report could be sent to you by e-mail. Also we are the made-in-china's gold supplier.