Basic Info.
Model NO.
FPR500A-280G/315P-T4
Application
High-performance Transducer, Three Phase Transducer, General Transducer, High Frequency Converter Transducer
Principle of Work
V/F Control Transducer
Main Circuit Type
Current
Voltage of Power Supply
Low Voltage Variable-Frequency Drive
Link of Transformation
AC-DC-AC Variable-Frequency Drive
Nature of DC Power
Current Variable-Frequency Drive
Transport Package
Carton/Wooden Box
Specification
1300*750*465mm
Product Description
Nameplate identification:FPR High performance closed loop vector converterPower classSingle-phase 220v±15% 0.4-2.2kwThree-phase 380V±15% 0.75-315kwProduct introductionFPR500 series relies on TI company's DSP dual-core professional control motor chip, which supplies the international leading vector control algorithm to realize the real high-precision flux vector torque control. It has built-in pg vector control (VC), pg - free vector control (SVC) and V/F control modes, which widely aplied to high speed control accuracy, rapid torque response and high performance at low frequency. The integration of torque control, speed control and position control can meet the high performance requirements of customer applications. And, FPR 500 has the ability to exceed the anti-trip performance of similar products and adapt to severe power grid, ambient temperature, humidity and dust, greatly improving the reliability of products.Technical characteristicsDrive motor type:Ac asynchronous motor, Ac permanent magnet synchronous motorFour control modes:PG vector control(FVC), PG- free vector control(SVC), V / F control, Torque controlSpeed control range:PG vector control(FVC)1:1000PG- free vector control(SVC)1:200V / F control 1:50Speed control accuracy:PG vector control (FVC)±0.2% PG- free vector control (SVC)±0.5%Starting torque:PG vector control(FVC):180 % rated torque/0.01Hz PG- free vector control (SVC)150% rated torque/0.25HzTorque control accuracy:PG vector control (FVC)±5% PG- free vector control (SVC)±8%Multi - motor switching: Two groups of motor parameters can realize the switching control of the two motors.Motor overheating protection:Optional IO expansion card, analog A / 3 can accept input from motor temperature sensorSupports multiple encoders:Supports differential, open collector, uvw, rotary transformer, sine and cosine encoderTorque limitation and control: the "excavator" feature, automatically limits the torque during operation to prevent frequent overcurrent trips. Closed loop mode can realize torque control.Products Specifications: Basic Function | Specification |
Maximum output frequency | 0~500Hz |
Carrier frequency | 0.5kHz~16.0kHz;According to the load characteristics, carrier frequency can be adjusted automatically |
Input frequency | Range :47~63Hz |
Control mode | V/F Open/closed loop vector control(SVC/FVC) |
Speed range | 1:50(Vector mode 0 ) 1Hz/150% rated torque |
Overload capability | G type:150% rated current for 60s; 180% rated current for 3s P type:120% rated current for 60s; 150% rated current for 3s |
Torque boost | Auto Torque boost Manual Torque boost; 0.1%~30.0%. |
V/F curve V/F | Four modes : Line , Multi-point , Square V/F curve, V/F separation |
Jog control | Jog frequency range:0.00Hz to F0-10(Max frequency) |
Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode, four kinds of Acc/Dec time Range of Acc/Dec Time0.0~65000.00s. |
DC brake | DC brake frequency : 0.00Hz to Maximum frequency brake time: 0.0 to 36.0s brake current value: 0.0 to 100% |
Simple PLC, Multi-speed | 16-speed operating through built-in PLC or control terminal |
Built-in PID | Close loop control system can be formed easily by using PID |
Automatic voltage regulating (AVR) | Output voltage is regulated when voltage of the power network changes |
Overvoltage and overcurrent stall control | During operation automatically limits the inverter output current and bus voltage, to prevent fan overcurrent and overvoltage trip. |
Rapid current limiting function | Minimizing flow failures, protect the normal operation of the inverter |
Instantaneous stop non-stop | Load feedback energy compensation voltage is reduced and continue to maintain a short time when change is momentarily interrupted. |
Speed tracking start | For high-speed rotation of the motor speed identification, impact- free smooth start |
Rapid current limit | Rapid software and hardware limiting technology to avoid frequent converter overcurrent fault. |
Virtual IO | Five sets of virtual DO,five sets of virtual DI, enables easy logic control. |
Timing Control | Timing control: set the time range 0.0Min~6500.0Hour |
Multi-motor switch | Two independent motor parameters, enabling two motors switching control |
Bus Support | Two independent Modbus communication, CAN-Link |
Command source | Given the control panel, control terminal, serial communication port given. It can be switched by a variety of ways. |
Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~30.0%. |
Frequency source | Nine kinds of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting, or serial port and so on. It can be switched by a variety of ways. |
Auxiliary frequency source | Nine kinds of auxiliary frequency source. Flexible implementation of auxiliary frequency tuning, frequency synthesis. |
Input terminal | Six digital input terminals, one only supports 50khz high pulse input Two analog input terminals, one support 0V~10V voltage input One support 0 ~ 10V voltage input or 0 ~ 20mA current input |
Output terminal | One high-speed pulse output terminal (optional open collector type), support of square wave 0 ~ 50kHz signal output One digital output terminal One relay output terminals Two analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output |
Display and operation | |
LED display | Display parameters and status information |
The key lock and function selection | Achieve some or all of the keys locked, scope definition section keys to prevent misuse. |
Protection function | Input/output phase failure protection ,Overcurrent protection ;Over voltage protection; Undervoltage protection; Overheat protection ; Overload protection |
Options | Brake assembly, PG card |
Environment | |
Application environment | In-door , free from direct sunlight , dust , corrosive gas , combustible gas ,oil mist , steam , water drop and salt . |
Altitude | Lower than 1000m |
Vibration | Less than 5.9m/s(0.6g) |
Standard wiring diagram:Product application:Packing details: FAQ: 1.Can I get some samples?Yes, Sample order is available for quality check and market test .But you have to pay for it. 2.What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order. 3.What's your payment terms ?
We usually accept all kinds of payment terms .Such as T/T, L/C, Western Union and Cash. 4.What's your warranty terms ?
We offer 18 months warranty time. 5.Do you have the products in stock?
Depends on your request, we have standard models in stock. Some special products and big order will be newly produced according to your order. 6.Can I mix different power in one containe?
Yes, Different models can be mixed up in one container, even one order. 7.How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .Every product will be fully assembled and carefully tested before packing and shipping . 8.Can you sell spare parts?
If you are using CHIFON products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes, our company have the right to export and can sell electrical product all over the world. 10.Can you make the inverter and soft starter control boards (switchgear)?
Yes, we have a lot of experience to design frequency inverter and soft starter cabinet according to your request. But you can send us the wiring diagram.
11. Can the inverter connect with computer?
Yes, all inverters have built-in RS485 port and support Modbus communication protocol. 12.How can I trust you?
Our company's values are integrity, responsibility, innovation and cooperation and our company has been audited and approved CE, ISO9001. Assessment report could be sent to you by e-mail. Also we are the made-in-china's gold supplier.
Address:
No. 25 Xianxing Rd, Xianlin Industrial Park, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Zhejiang Chifon electric Co., Ltd. is a high-tech enterprise specializing in research, development, manufacture and sales of electric drive, industrial control and motor energy saving technology products.
The company has completely independent intellectual property rights and several national patent innovation technologies. It has always adhered to technological innovation, with the goal of continuously meeting customer s needs, and has always adopted the design philosophy of high quality, high precision, high efficiency and low maintenance. It has gradually become a domestic and foreign supplier of electrical transmission equipment that is worth relying on.
The company′s products include general frequency conversion drives, special industrial application planes, integrated solutions and new energy products. The company′s research and development team gathers numerous professional and technical personnel at home and abroad, and continuously innovates on the basis of mastering high-performance vector frequency conversion technology and servo technology platforms to realize technological breakthroughs in various related fields. This enables Chifon to provide customers with the most suitable products and solutions to meet their requirements in terms of high efficiency, energy conservation, environmental protection and overall cost control.
Our inverter specifications:
1.220V ~ 240V FPR500A-S2 series single-phase input& three phase output, power section: 0.75kw ~ 2.2kw
2.380V ~ 460V FPR500A-T4 series three-phase input&output, power section: 0.75kw ~ 710kw
3.380V~460V mini type FPR500M-T4 series three-phase input&output, power section: 0.75kw~22kw
4. Customized 220V ~ 240V FPR500A-T2 series three-phase input&output
5. Customized FPR500Z series 220V three-phase input& 380V output
6. FPR500E is available for synchronous motors like FPR500A and FPR500M.
High-quality products, continuously updated technology and high-quality service have made the reputation of the cadres increasingly popular.
BEST SERVICE, WE DRIVE!