| Application: | High-performance Transducer, Three Phase Transducer, General Transducer |
|---|---|
| Output Type: | Triple |
| Principle of Work: | V/F Control Transducer |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Model No. | FPR500M-4.0G-T4 | Size(H*W*D) | 18.5*11.8*15.7cm |
| Brand | CHIFON | Net Weight | 2KG |
| Input Voltage | Three phases 380V-460V | Warranty | 18 months |
| Output Voltage | Three phase 380V-460V | Control Mode | VF, SVC, VC, Torque Control, Tension Control |
| Rated Output Current | 9A | Production Capacity | 5000pcs/months |
| Adaptive motor | Three phases 3.7kw/4kw | Hs Code | 8504409940 |
FPR series adopts a new generation of special digital signal processors (DSP) for motor control of TI Company, USA. Its frequency can reach up to 150 MHz.
And adopt the latest generation Infineon IGBT module, combined with the 175 ºC maximum junction temperature characteristics. This series further reduces the switching loss by using innovative PWM modulation, so that the driver can be used normally in the environment of 50 ºC .
| Power Class | Single-phase 220v±15% Three-phase 380V±15% |
| Input frequency | 47~63Hz |
| Output frequency range | 0~500Hz |
| Overload capability | G type:150% rated current for 60s; 180% rated current for 3s P type:120% rated current for 60s; 150% rated current for 3s |
| Torque boost | Auto Torque boost Manual Torque boost; 0.1%~30.0%. |
| V/F curve V/F | Four modes : Line , Multi-point , Square V/F curve, V/F separation |
| Jog control | Jog frequency range:0.00Hz to F0-10(Max frequency) |
| Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode, four kinds of Acc/Dec time Range of Acc/Dec Time0.0~65000.00s. |
| DC brake | DC brake frequency: 0.00Hz to Maximum frequency brake time: 0.0 to 36.0s brake current value: 0.0 to 100% |
| Simple PLC, Multi-speed | 16-speed operating through built-in PLC or control terminal |
| Built-in PID | Close loop control system can be formed easily by using PID |
| Automatic voltage regulating (AVR) |
Output voltage is regulated when voltage of the power network changes |
| Overvoltage and over current stall control |
During operation automatically limits the inverter output current and bus voltage, to prevent fan over current and overvoltage trip. |
| Rapid current limiting function |
Minimizing flow failures, protect the normal operation of the inverter |
| Instantaneous stop non-stop | Load feedback energy compensation voltage is reduced and continues to maintain a short time when change is momentarily interrupted. |
| Speed tracking start | For high-speed rotation of the motor speed identification, impact- free smooth start |
| Rapid current limit | Rapid software and hardware limiting technology to avoid frequent converter over current fault. |
| Virtual IO | Five sets of virtual DO, five sets of virtual DI, enables easy logic control. |
| Timing Control | Timing control: set the time range 0.0Min~6500.0Hour |
| Multi-motor switch |
Two independent motor parameters, enabling two motors switching control |
| Bus Support | Two independent Modbus communication, CAN-Link |
| Command source | Given the control panel, control terminal, serial communication port given. It can be switched by a variety of ways. |
| Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~30.0%. |
| Frequency source | Nine kinds of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting, or serial port and so on. It can be switched by a variety of ways. |
| Auxiliary frequency source |
Nine kinds of auxiliary frequency source. Flexible implementation of auxiliary frequency tuning, frequency synthesis. |
| Input terminal | Six digital input terminals, one only supports 50khz high pulse input Two analog input terminals, one support 0V~10V voltage input One support 0 ~ 10V voltage input or 0 ~ 20mA current input |
| Output terminal |
One high-speed pulse output terminal (optional open collector type), support of square wave 0 ~ 50kHz signal output One digital output terminal One relay output terminals Two analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output |
| Display and operation | |
| LED display | Display parameters and status information |
| The key lock and function selection | Achieve some or all of the keys locked, scope definition section keys to prevent misuse. |
| Protection function | Input/output phase failure protection ,Overcurrent protection ;Over voltage protection; Undervoltage protection; Overheat protection ; Overload protection |
| Options | Brake assembly, PG card |
| Environment | |
| Application environment | In-door, free from direct sunlight, dust , corrosive gas, combustible gas, oil mist , steam , water drop and salt . |
| Altitude | Lower than 1000m |
| Vibration | Less than 5.9m/s(0.6g) |
| Low-cost frequency inverter | Chifon FPR 500A series frequency inverter | Chifon FPR 500M series frequency inverter |
| Disadvantages: 1.Simplify the design and reduce the production cost. 2. The purchased components are mainly cheap brands, and the consistency of components cannot be guaranteed. 3. The production process is backward, which barely meets the technical requirements of inverter products. 4. After-sales service cannot be guaranteed. |
1. CHIFON factory focuses on products, and its technology development starts early. our technical department has the R&D ability to accept OEM orders. 2. Key components such as drive circuit and electrolytic capacitor used in frequency converter are purchased from leading brands. 3. The mature production process fully meets the technical requirements of frequency converter production. 4.18 months warranty period, after-sales service is guaranteed |
1. The raw materials and production process are the same as FPR500 A series. 2. Lower cost with simplified design. 3. A neat solution with Less volume, weight and transportation cost domestic and abroad. 4. 18 months warranty period, after-sales service is guaranteed |
| Advantages: the price is very low | Advantages: The price is lower than the international leading brands, and cost-effective. | Advantages: The price is lower than FPR500A series, which can meet customers with low budget. |
Overall Comparison of 0.75kw-2.2kw between FPR500A series and FPR500M series |
SIZE:24*18*21CM WEIGHT:2kg |
SIZE:22*14*19CM WEIGHT: 1.3kg |
About us
Zhejiang Chifon electric co,.ltd. is a high-tech enterprise specializing in research, development, manufacture, and sales of electric drive, industrial control, and motor energy-saving technology products.
We insist on the principle of developing of "customer-centric and technological solution" to provide you with precise speed control and energy saving!
Daily inspection items
Before powering on the inverter, check the temperature and humidity of the surrounding environment. Excessive temperature will cause the inverter to overheat and alarm. In severe cases, it will directly damage the inverter's power components and short circuit; excessively humid air will cause a direct short circuit inside the inverter. When the inverter is running, pay attention to whether the cooling system is working, such as: whether the air duct is smooth and whether the fan has abnormal sound. Inverters with a relatively high protection level such as inverters above IP20 can be installed directly open; inverters below IP20 should generally be installed in cabinets, so how does the cooling effect of the inverter cabinet directly affect the normal operation of the inverter? Exhaust systems such as whether the fan rotates smoothly, and whether there is dust and obstructions in the air inlet are all places that we can't ignore in daily inspections. Whether the motor reactor, transformer, etc. are overheated and smelly; whether the inverter and motor have abnormal noise; whether the inverter panel current display is too large or the current variation is too large, whether the output UVW three-phase voltage and current are balanced, etc.
Regular maintenance
Clean the air duct and dust inside the air filter. Check whether the screws, bolts, and plug-in are loose and whether the input and output reactors have short circuits to the ground and the phase-to-phase resistance. The normal should be greater than tens of megohms. Whether the conductors and insulators are corrupted, if necessary, wipe them with alcohol in time. When conditions permit, it is necessary to use an oscilloscope to measure the stability of the output voltage of each circuit of the switching power supply, such as 5V, 12V, 15V, 24V, and other voltages. Is there any distortion in the method of measuring each waveform of the driver circuit? Whether the UVW interphase waveform is a sine wave. Check if there is any trace of fire in the contactor of the contactor. If it is serious, replace the new product with the same model or larger than the original capacity; confirm the correctness of the control voltage and carry out the sequence protection action test; confirm that the protection display circuit is not abnormal; confirm that the inverter is running alone the balance of the output voltage.
It is recommended that periodic inspections should be conducted once a year.
Replacement of spare parts
The inverter is composed of various components, some of which will gradually reduce and aging after long-term work. This is also the main reason for the failure of the inverter. In order to ensure the long-term normal operation of the equipment, the following components should be replaced regularly:
(1) Cooling fan
The power module of the inverter is the most serious device that generates heat. The heat generated by a continuous operation must be discharged in time. The life of the general fan is about 10kh ~ 40kh. According to the continuous operation of the inverter, it is converted to 2 to 3 years. The fan must be replaced once. The direct cooling fan has two wires and three wires. One of the two wires of the fan is positive and the other is negative. 1. There is a detection line outside the negative pole, please pay attention when replacing it, otherwise, it will cause the inverter overheating alarm. The AC fan is generally divided into 220V and 380V, and the voltage level should not be mistaken when replaced.
(2) Filter capacitor
Intermediate DC loop filter capacitor: also known as an electrolytic capacitor, its main function is to smooth the DC voltage and absorb the low-frequency harmonics in DC. The heat generated by its continuous operation plus the heat generated by the inverter itself will accelerate the drying up of its electrolyte. Directly affect the size of its capacity. Under normal circumstances, the service life of the capacitor is 5 years. It is recommended to regularly check the capacitance of the capacitor once a year. Generally, its capacity is reduced by more than 20% and should be replaced.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}